Motel Keychains are the latest craze! They are 1.5 in wide and vary in height, but do not go over 2.5 high. They can be used on any hard surface. The transfers are made in house so please reach out for any custom sizes or images.
Instructions for Application:
*Be sure to wipe area clean with alcohol and a paper towel before you begin.
*Gently peel the transfer from its backing. If there are any parts that are not transferring you can use your nail, credit card or a scraper to burnish the opposite side of the film.
*Place the transfer onto your chosen surface, be sure that you have proper alignment and straightness. (TIP: you can place a piece of blue painter's tape to use as a guide to be sure your letters are straight. The transfer film will not stick to the blue tape, but the decal will so be sure to place the decal above the blue tape. If you are using a large decal, you can also use a piece of blue painter's tape to hold it in place before you start for proper alignment. Peel half of the decal from the backing and adhere that half of the decal onto your surface. You can now remove the painters tape. Fold over and remove the rest of the backing and adhere the other half of the transfer. (Note: Once applied, the transfer cannot be removed, so ensure accurate positioning.)
*Press down on the transfer, starting from the center and move outward.
*Peel off the clear film very slowly making sure to watch for any parts that are not completely stuck.
* If you have a bubble use a pin to pop it then burnish the decal again. They are scratch resistance so don't be afraid to use pressure.
*Thoroughly rub the entire design with your fingers and then a craft scraper for optimal adhesion.
Maintenance Instructions:
Hand wash only